Tripp Lite SMART1000RM1U 1000VA 1U Rackmount UPS System

Tripp Lite SMART1000RM1U 1000VA 1U Rackmount UPS System
List Price: CAD $461.42
Qty: 

Specification

  • UPS-TRP-SM1K1U
  • Tripp Lite
  • SMART1000RM1U
  • In Stock (Usually ships within 1 business day)
  • ComponentsUPS & SurgeUPS

Description

  • Mfr Part Number: SMART1000RM1U
  • Voltage compatibility: 120 V AC
  • Frequency compatibility: 60 Hz
  • Output:
    • Output volt amp capacity: 1000 VA
    • Output watt capacity: 640 watts
    • Output nominal voltage: 120 V AC
    • Output voltage regulation: Line mode - Sine wave line voltage 120V (-21% +8%); Battery mode - Sine wave output within 5% of 120VAC
    • Output frequency regulation: Line mode - Passes line frequency of 60Hz +/-10%; Battery mode - Inverter output regulated to 60Hz +/-0.5Hz
    • Outlet quantity / type: 6x NEMA 5-15R
    • Overload protection: Via 15A input breaker
  • Input:
    • Maximum input amps: 9.2 A
    • Input connection type: NEMA 5-15P
    • Input cord length: 10 ft., 14 gauge
    • Recommended electrical service: 15A 120V
  • Battery:
    • Full load runtime: 10 minutes (640 watts)
    • Half load runtime: 13 minutes (320 watts)
    • DC system voltage: 24 V DC
    • Typical battery lifespan: 3~6 years, depending on usage
    • Battery recharge rate: 2~4 hours to 90%
  • Voltage Regulation:
    • Overvoltage correction: Input voltages between 128 and 147 are reduced by 12%
    • Brownout correction: Input voltages between 83 and 107 are boosted by 14%
  • Surge / Noise Suppression:
    • AC surge suppression: 480 joules
    • AC suppression response time: Instantaneous
    • EMI / RFI AC noise suppression: Yes
  • Communications:
    • Network monitoring port: 2x built-in monitoring ports; 1x USB; 1x DB9
    • SNMP compatibility: Built-in accessory slot accommodates internal SNMP / Web card and other network accessories
    • WatchDog compatibility: Yes
  • Line / Battery Transfer:
    • Transfer time from line power to battery mode: 2~4 milliseconds
    • Low voltage transfer to battery power: 83V (resets to line power as line voltage increases to 87V or higher)
    • High voltage transfer to battery power: 147V (resets to line power as line voltage decreases to 143V or lower)
  • Certifications: UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico)
  • Special Features:
  • EPO port: Includes RJ11 EPO (emergency power off) port and cable
  • TVSS grounding: Includes back panel grounding point with thumbscrew for data line surge suppressors and other network accessories requiring a safe grounding point
  • Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure
  • Appearance: Attractive black color scheme
  • Physical:
    • Material of construction: Steel
    • Form factors supported: Rack/Tower (1U)
    • Cooling method: Built-in cooling fan
    • Battery Access: Battery access door allows hot swap battery replacement without powering connected equipment off
    • Dimensions (WxDxH): 17.5 x 16.75 x 1.75 inch / 44.5 x 42.5 x 4.45 cm
    • Weight: 32 lbs / 14.5 kg

    • Why can't I see the price?

    This display appears for low price items and indicates that additional discount is applicable on adding the item to the Shopping Cart. You can view the discounted price by selecting the item and then adding the item to cart. Adding the item to cart does not imply that you are obliged to buy it – you can always delete the item from your cart if you decide not to buy it.